Warning
This equipment should be operated only from the included power supply. To
remove power from the equipment safely, remove all power cords from the
rear of the equipment, or the desktop power module (if detachable), or from
the power source receptacle (wall plug).
Power cords should be routed so that they are not likely to be stepped on or
pinched by items placed upon or against them.
Do not defeat the safety purpose of a polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A ground-
ing-type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet. Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. There are no user-service-
able parts inside. To prevent the risk of shock, do not attempt to service this
equipment yourself because opening or removing covers may expose you to
dangerous voltage or other hazards. Contact your local Neets reseller or
distributor.
If the equipment has slots or holes in the enclosure, these are provided to
prevent overheating of sensitive components inside. These openings must
never be blocked by other objects.
Do not use this equipment near water.
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture and objects filled with liquids.
Unplug the product before cleaning. Clean only with a dry cloth and not
cleaning fluid or aerosols. Such products
could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Caution
Read these instructions. Read and understand all safety and operating
instructions before using the equipment. Keep these Instructions.
The safety instructions should be kept for future reference. Heed all warn-
ings. Follow all warnings and instructions marked on the equipment or in
the user information. Avoid attachments. Do not use tools or attachments
that are not recommended, as they may be hazardous.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
The Class A limits are designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
FCC regulations state that any unauthorized changes or modifications to this
equipment, not expressly approved by the manufacturer, could void the user’s
authority to operate this equipment.
14
Summary of Contents for UniForm
