![background image](http://html1.mh-extra.com/html/neets/sb1/sb1_installation-manual_3851871006.webp)
Page 6 of 16
Specifications
Neets Sound Bar SB1
Audio output
Output power
4 x 20 Wrms
THD+N
< 0.1 % @ 1 W
Woofer
2 x 4” dual magnet,
sandwich membrane
w/rubber surround
Tweeter
2 x 1” soft dome
Frequency Response
50 Hz - 20 kHz +/- 3
dB
Maximum SPL
106 dBA
Unbalanced audio input
Number of inputs
1 x stereo input
Max input level
1 Vrms
Input impedance
< 20 k Ohm
Wake-on-signal Yes
Connector
2 RCA female
Balanced audio input
Number of inputs
1 x stereo input
Max input level
2 Vrms
Input impedance
< 100 k Ohm
Wake-on-signal Yes
Connector
1 x 5 pin screw block
Digital audio input
Interface standard
IEC 60958
AC-3, DTS decoding
Not supported
Bit depth
16/24 bit
Sample rate
32/44.1/48/96/192 kHz
Wake-on-signal Yes
Connector
1 TOSLINK female
Approvals
IEC/EN 61000-6-1
IEC/EN 61000-6-2
RS-232
Ports
1 x bidirectional
Baud rate
19200 bit/sec
Data bits
8
Parity None
Stop bits
1
Connector
1 x 3 pin screw block
Power input
Input voltage
24 VDC
Max power usage
50 W
Standby power usage < 0.5 W
Connector
5,5 mm DC plug
Power adaptor
Line voltage
100 VAC – 240 VAC
Line frequency
50 Hz – 60 Hz
Output voltage
24V
Max output current
2.5A
Max power usage
70 Watt
General
Enclosure
Wood (MDF)
Enclosure finish
Mate black vinyl
Front grille
Textile covered MDF
Width
1018 mm / 40.1 inch
Depth
75 mm / 2.95 inch
Depth w. wall bracket 81mm / 3.18 inch
Height
130 mm / 5.1 inch
Weight
4.5 Kg
Shipping width
1120 mm / 44.1 inch
Shipping depth
150 mm / 5.9 Inch
Shipping height
200 mm / 7.8 Inch
Shipping weight
6.5 Kg
Storage temperature -20 °C to 50 °C
Storage moisture
Non condensing