Page 11
Doc. no#: 310-0050-001-002 R103 Manual
Fault
Solution
System are resuming
factory default
settings
When pressing Switch 1 and 4 during power on the system
will delete the current settings and resume factory default.
This method are only intended to be used if the control
system lock up and enter “Unexpected Error”
System log file
The Neets Control – ZULU has a log file, which contains information, warning and error that the system
encounters during run.
The log file looks like below.
To give you the best support possible we recommend that you have access to the log file when contacting
support.
There are two ways to get access to this file:
uSD card
If you put the uSD card into your computer you find the log file here: Drive\System\Log.txt
HTTP
Enter the following address into your browser: http://xxx.xxx.xxx.xxx//System/Log.txt.
xxx.xxx.xxx.xxx are the IP address of your Neets Control – ZULU.
Remember the two“//”.
Summary of Contents for Zulu
Page 1: ......
