52 - EN
53 - EN
3. Make sure that the screen is
at
least +15 °C
, as the adhesive pads
do not work correctly at lower
temperatures. If necessary, heat
the windscreen using the vehi
-
cle’s fan or (very carefully) with a
hair-dryer.
4. Remove the protective film from
the 4 adhesive pads and press
the parking disc firmly against the
windscreen for about 30 seconds.
Do not press against the middle
of the back. Then check from the
outside that all 4 adhesive pads
are sticking to the screen well.
5. Your
PARK LITE
is now installed
and ready for use.
Warning:
The
PARK LITE
must not be left loose in
the vehicle
, it must be fitted to the wind
-
screen in order to work properly.
How does
PARK LITE
work
When you park the vehicle, the
PARK
LITE
automatically sets itself to the next
half hour after your arrival time (e.g. if
you arrive at 10:07, the
PARK LITE
will
set itself to 10:30).
Manual setting
Your
PARK LITE
can also be set manually.
If you wish to set your
PARK LITE
manu
-
ally, simply press the
③
button to move
the clock forward at 30 minute intervals.
Press the button down and release once
the desired time appears. Please note
that this function is only available if the
PARK LITE
is in park mode.
Summary of Contents for Park Lite
Page 1: ...PARK LITE APP ...
