Overview: Connections and setting options for
the SQ-AMP MK-II
Power Switch
(ON / OFF)
Status LED
(illuminates during operation)
Controls the frequency
range that is transmitted
to the vibration unit
Controls the output
power of the signal
that is being
transmitted to the
vibration unit
Controls the additional
enhancement of bass
signals & can improve
vibrations
Connection jack
for headphones or
an analog headset
Connection jack for
the microphone of
an analog headset
Volume control
knob for
headphones or
headset
Signal Input Panel
Signal sources from
the PC (for example)
will be fed here
Signal Link Output Panel
Signal sources will be
output here or transmitted
to a speaker / sound system
Power Output
for the connection
of the vibration unit
Power Cable
EU Version: 220V-240V 50Hz
US Version: 100V-120V 60Hz
Strip the cable ends and put them in the adapter as shown in the pictures.
Push the adapter in the direction of the vibration unit, insert the cable ends from below and let loose.
The cable end will be fixed automatically.
Connecting the speaker cable adapter to
the vibration unit:
PAGE 6
