26
EN Operating instructions
5
Initial Startup PRIMUS 2 H1N+
5.1 Power supply safety instructions
WARNING!
Destruction! Explosion risk!
f
Use charger included in the scope of delivery only.
f
Do not insert
batters
in the rechargeable battery pack and charge with the charger.
CAUTION!
Damage!
f
Do not mix dead and fully charged batteries.
f
Do not place rechargeable batteries or batteries on radiators or store them in the sun.
5.2 General power supply notes
Use the charger in dry rooms only.
5.3 Operating the laser with rechargeable batteries
Rechargeable battery
pack is pushed in
Connect charger
1 Connect charger to rechargeable battery
pack.
2 Connect charger to mains supply.
Note voltage! (110-230 V)
Charging time for complete charging:
12-14 h.
During charging, the LED above the char-
ger socket lights up in the rechargeable
battery pack.
Operation possible during the charging
process (charging time lengthened).
5.4 Operating the laser with batteries
When delivered, the rechargeable battery pack is inserted, the laser is ready
for use. Replace rechargeable battery pack. as follows:
Note pole position!
Release rechargea-
ble battery pack /
battery compartment
locking device
Pull out rechargeable
battery pack / batte-
ry compartment
Insert batteries into
battery compartment
Push in battery
compartment
Lock battery com-
partment
ENVIRONMENT
Batteries are special waste and may not be put into domestic waste. They must be
properly disposed of according to the respective national guidelines.
Summary of Contents for PRIMUS 2 H1N +
Page 87: ...87...
