Nedo 430338, Operating Instructions Manual

Page: 10 / 48

10
EN Operating instructions
3 Laser receiver
3.1 Display and operating elements of the laser receiver
9
10
11
(5)
(4)
(2)
1
LCD display BATTERY
Display lights up: limited remaining life
(battery approx. 5h / rechargeable battery approx.
1h). Display flashes: Switching off imminent, replace
rechargeable batteries/batteries!
2
LCD display LOWER
Lights up if the laser line is within the sensor window
but below the zero line. In addition, the red LED next
to the reception field lights up and a slow intermittent
tone is also emitted.
3
LCD display DETECTOR FIELD RESOLUTION
Displays the currently set resolution:
fine = ±1 / middle = ±4 mm /
rough = ±6 mm - without mm-indicator (both
Display symbols are flashing)
4
LCD display TARGET
Lights up if the laser line is located at the level of
the zero line. In addition, the green LED next to the
reception field lights up and a continuous tone is also
emitted.
5
LCD Display HIGHER
Lights up if the laser line is within the sensor window
but above the zero line. In addition, the yellow LED
next to the reception field lights up and a fast intermit-
tent tone is also emitted.
6
LCD display „mm“
Shows the unit.
7
LCD display “height”
Shows the distance to the reference / zero marking
8
LCD display ACOUSTIC SIGNAL
Display = acoustic signal loud/
Display = acoustic signal quiet/
No Display = acoustic signal off
9
Button ACOUSTIC SIGNAL
Switches the acoustic signal between
loud/quiet/off.
10
Button ON/OFF
Switches the receiver on and off.
11
Button DETECTOR FIELD RESOLUTION
Switches the resolution between
fine = ±1 / middle = ±4 mm /
rough = ±6 mm - without mm-indicator
2
4
3
8
5
1
(3)
6
7