6
Installation of the Wi-Fi Smart Ceiling Light (image B – D)
-
Make sure the central power is switched off.
1. Fasten A
1
with the screws A
8
.
2. Connect the wires to the connector A
5
and fasten the screws.
3. Place A
6
in the slot in A
4
.
4. Attach A
2
to A
1
by fastening A
7
into the screw holes.
5. Switch on the central power.
6. Switch on the lamp.
7. In the Nedis SmartLife app, tap + D
3
.
8. Under Search Device, select the lamp from the list of available devices.
9. Check if the lamp is blinking. If so, tap to confirm.
4
If the lamp does not blink, turn the lamp off and on 3 times and check again.
10. Enter the password of the 2,4 GHz Wi-Fi network to which your phone is
connected and tap Confirm. The Nedis SmartLife app will now search for the
lamp.
11. Rename the lamp after it has been found and added.
4
If the regular connection method fails, the lamp can be connected using AP
mode:
1. Tap + D
3
.
2. Under Add Manually, tap Smart Bulb.
3. Tap AP Mode in the top right corner.
4. Follow steps 9 till 11 of the regular connection method.
Specifications
Product
Wi-Fi Smart Ceiling Light
Article number
WIFILAC30WT
Dimensions
300 x 300 x 38 mm
Weight
1200 g
Power supply
220 – 240 V AC 50 – 60 Hz
18 W
Wireless technology
Wi-Fi
Operating temperature
-10 - 40 °C
Frequency Range
2412 - 2472 MHz
Max. radio transmit power
9 dBm
Brightness
1200 lm
