6
•
Consult the local laws and regulations for this product before installing and
using.
Charging the product through micro USB
1. Plug the micro USB cable
A
q
into the micro USB port
A
4
.
2. Plug the other end of
A
q
into a 5.0V/1.0A USB adapter (not provided).
Wired connection
1. Loosen the screws of the external power input
A
t
.
2. Hold one of the 8 - 24 VAC wires behind the metal plate of
A
t
.
3. Tighten the screw of
A
t
to connect the wire to the doorbell.
4. Hold the other 8 - 24 VAC wire behind the other metal plate of
A
t
.
5. Tighten the last
A
t
screw to complete connecting the 8 - 24 VAC
connection.
Mounting the product
(image
B
)
1. Hold the bracket
A
2
against the wall where you want to install the product.
2. Use
A
2
to mark the drill locations with a pencil.
3. Remove
A
2
and drill the holes, using a drill with appropriate drill bit for the
wall type.
4. Insert the plugs
A
o
into the holes.
5. Use the 4 screws
A
i
to fasten
A
2
to the wall.
Making video recordings and screenshots
4
Optional: insert a microSD card (not included) into the microSD card slot
A
w
, to locally store recordings.
You can make video recordings and screenshots on your phone, by tapping
Record and Screenshot.
Playing back motion detected videos
Motion detected videos are automatically saved on the SD card. (If inserted in
the camera).
1. Tap Playback to open the stored videos.
2. Select the day of the recording.
3. Zoom and drag the timeline to select the recording.
