6
7
4
If your device switches on or mutes, the remote is ready
for use.
4
If the device does not switch off or mute, repeat steps 4-5
using another code.
4
If no buttons are pressed for 30 seconds, the remote exits
programming mode and the LED switches off.
Programming the product to the device
manually
1. Switch on your device.
2. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T
A
rtyu
) for 3 seconds.
4
The LED indicator
A
4
lights up.
3. Aim the remote at your device.
4. Press the channel up button
A
5
to try the next code and
press the channel down button
A
6
to try the previous
code.
4
When your device switches off, the code is correct.
5. Press the OK button
A
w
to confirm.
4
The LED indicator
A
4
switches off and the code is saved.
6. Aim the remote at your device.
7. Press the on/off button
A
1
or the mute button
A
4
to test
the product.
4
If your device switches on or mutes, the remote is ready
for use.
4
If your device does not switch off or mute, follow the steps
in the next chapter.
4
If no buttons are pressed for 30 seconds, the remote exits
programming mode and the LED switches off.
Automatic search
1. Switch on your device.
2. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T
A
rtyu
) for 3 seconds.
4
The LED indicator
A
4
lights up.
3. Aim the remote control at your device and press and hold
the on/off button
A
1
for 3 seconds.
4
The LED indicator
A
4
flashes once every 2 seconds when a
new code is sent out.
4
When your device switches off, the code is correct.
4. Press the OK button
A
w
to confirm.
4
The LED indicator
A
4
switches off and the code is saved.
5. Aim the remote at your device.
6. Press the on/off button
A
1
or the mute button
A
4
to test
the product.
4
If your device switches on or mutes, the remote is ready
for use.
4
If your device does not switch off or mute, follow the steps
in the next chapter.
Automatic search for TV/SAT
1. Switch on your TV or SAT.
2. Press and hold the button corresponding to your device
(TV/SAT
A
yu
) for 3 seconds.
3. Aim the remote at your device.
4. Press and hold the mute button
A
4
.
4
The LED indicator
A
4
flashes rapidly while trying multiple
codes.
4
After one batch of codes, the LED indicator
A
4
lights up
for 15 seconds and then switches off.
4
When your device is muted, the correct code has been
found within the batch of codes.
5. Release the mute button
A
4
.
4
Every 3 seconds, the product tries one of the codes from the
batch to find the correct code.
6. When your device is unmuted again, press the OK button
A
w
to confirm.
4
The LED indicator
A
4
switches off and the code is saved.
7. Aim the remote at your device.
8. Press the on/off button
A
1
or the mute button
A
4
to test
the product.
4
If your device switches on or mutes, the remote is ready
for use.
4
If your device does not switch off or mute, follow the steps
in the next chapter.
Automatic brand search
1. Switch on your device.
2. Open the code list.
4
The codes are arranged in order of brand, device, type.
3. Check if the brand of your device is listed.
4. Check what button corresponds to your brand.
5. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T
A
rtyu
) for 5 seconds.
6. Press and hold the buttons corresponding to your brand
together for 5 seconds.
7. Release the buttons when the LED indicator
A
4
flashes 3
times.
8. Aim the remote at your device.
9. Press and hold the on/off button
A
1
.
10. Every second, the product tries a new code.