Nederman RSR, Instruction Manual

Page: 13 / 16

RSR
13 QMM042(02)
EN
10.1 Maintenance instruction
NEDERMAN Swivel chute is very robust in design but should like every other
production machine be regularly checked and maintained.
Daily checks should be made at the start of operations until a permanent
maintenance schedule can be established. When this has been done only
routine checks and general observations are necessary.
10.2 Lubrication
Swivel bearing
The swivel bearing should be lubricated with grease. Use ball bearing grease of
good quality.
Greasing interval: every 6th month at one-shift operation, 50 g grease per
swivel bearing.
Chain
Greasing interval: every 6th months at one-shift operation.
10.3 Spare parts
Contact your nearest authorized distributor or NEDERMAN for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.pl
Ordering spare parts
When ordering spare parts always state the following:
• Product serial number and NEDERMAN reference number (see the
product identification plate).
• Article number and designation - see Table 10-1.
• Quantity of the parts required.
Table 10-1: Spare parts specification - see Fig. 2
Pos. Article No. Designation Qty Unit
1 97022009 Chain wheel 1 pce
2 9702116 Roller chain 1 pce
3 9702117 Chain link 1 pce
4 960401 Motor/gear 1 pce
5 902205 Swivel bearing - 330 mm 1 pce
6 970127 Swivel bearing - 500 mm 1 pce
11 Recycling
The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or NEDERMAN if uncertainties arise
when scrapping the product at the end of its service life.