Nederman 30800393, User Manual

Page: 13 / 43

Hose Reel 893
4.6 Selecting hose
When selecting a hose, see the dimension and work-
ing pressure on the reels type label. Also, see Fig-
ure 1(B) .
4.7 Hose fitting
See Figure 6 and Figure 7 .
1 Place the reel on a suitable working bench.
WARNING! Risk of personal injury
Ensure that there is no tension in the
spring.
2 Feed the hose through the reel outlet and attach it
to the nipple on the drum shaft.
3 Mount the hose-stop close to the outer limit of the
hose.
4 Reel the hose on to the reel by turning the spring-
loaded hub with a tommy bar, see Figure 6 item
5. Once the hose has been wound on to the drum,
make sure that it has the correct tension by turn-
ing the hub a further 2 - 6 revolutions.
5 Fit the inlet hose, min. length of 1.0 m.
6 Fit the reel, see
Figure 2 , Figure 3 and Figure 4 .
7 Check that the required length of hose can be un-
reeled without stretching the spring to its limit.
8 Turn on the supply and check that the hose con-
nections do not leak.
4.8 Adjust spring tension
See Figure 8 .
A Increasing the spring tension
B Decreasing the spring tension
If the spring power has been increased, check that the
required length of the hose can be drawn out without
stretching the spring to its limit.
5 Maintenance
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Perform the following maintenance regularly or at
least once a year:
• Check the spring function by testing if the hose re-
coils properly.
• Check that swivel and hose couplings do not leak.
Change the seal if required. Clean the swivel and
couplings.
• Check that the hose is intact. Clean the hose if it is
oily or dirty.
• Check the reels ratchet mechanism.
• Check the mounting of the reel on wall or ceiling.
5.1 Repair instructions
See Figure 9 . Instructions for hose fitting, see Sec-
tion 4.7 Hose fitting . Instructions for changing the
spring cassette, swivel or seal come with each spare
part.
WARNING! Risk of personal injury
Before repairing the hose reel:
1 Turn off the supply of air/water/oil/grease.
2 Neutralize the spring power by removing
the hose-stop and let the hose recoil.
6 Spare Parts
CAUTION! Risk of equipment damage
Use only N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
for advice on technical service or
if you require help with spare parts. See also
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
.
6.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
/
$
e
$
n
$
/
$
s
$
e
$
r
$
v
$
i
$
c
$
e
$
/
$
s
$
p
$
a
$
r
$
e
$
-
$
p
$
a
$
r
$
t
$
-
$
s
$
e
$
a
$
r
$
c
$
h
$
).
• Quantity of the parts required.
7 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or
$
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
if uncertainties arise
when scrapping the product at the end of its service
life.
EN
13