MagnaTrack S
GB
16
The entire guide rail can be mounted
with a slight fall: 50 - 100 mm (2 - 4 in)
is recommended per 6 m (20 ft) length
(the lowest point to be at the station
door end of the track).
When mounting the rail, ensure that sui-
table fixing bolts are used considering
the ceiling construction material and the
traction forces in the suspension points.
2
Place all the rail profiles in line with
each other on the floor, as shown in the
figure. Screw the profiles together with
the lengthening joints.
All mounting brackets should
be braced with two bracing bars
positioned sideways according to
one of the figures.
1
Fasten the
mounting chains,
approximately 2,4 m
(8 ft) apart, in every other
profile.
3
Lift the whole rail and fit it in the ceiling.
The mounting chains should be fixed in
bars, brackets or similar arrangements
according to the examples below.
The first mounting bracket should be braced
with a reverse angled bracing bar.
The last mounting bracket should be braced
with a forward angled bracing bar.
0.1 - 1.0 m
4 in - 3 ft
~ 2.4 m
~ 8 ft
F
4500 N
1010 lbs
F
F
4500 N
1010 lbs
4500 N
1010 lbs
Summary of Contents for 20812564
Page 2: ...MagnaTrack S ...
Page 91: ...MagnaTrack S 91 ...
