UPASS ACCESS | INSTALLATION GUIDE
Reader Configuration
12/23
5
READER CONFIGURATION
The uPASS reader settings can be configured easily using the UHFTOOL software.
Software developers can find the communication protocol description in the
firmware manual.
5.1
UHFTOOL SOFTWARE
Figure 5: UHFTOOL software
5.2
SETTINGS
Click 'View', 'Show config sidebar' or press F11 to show the configuration sidebar. In
the sidebar the configuration categories are shown. Expand or collapse the setting
panels by clicking on it.
5.2.1
READ DATA
Configure here which tags should be selected, how to access these tags, what data
should be read from these tags and if a security check should be performed.
By default the reader is configured to select ANY TAG and read its EPC number.
Select NEDAP to read only Nedap tags.
NEDAP DUAL-ID (introduced in firmware version 2.29) enables the uPASS to search
for Nedap vehicle-id tags. When a vehicle-id tag is found, the uPASS searches for
driver-id tags.
Example 1
Read only NEDAP UHF tags and use two way authentication:
Figure 6: Read data example 1
