BOOSTERS 2G
© Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO
Page 3 of 21
1
0B
INTRODUCTION
The Prox-Booster, Smartcard-Booster and Transition-Booster are dual ID tags enabling simultaneous
identification of the inserted personal ID card and the embedded vehicle ID resulting in rapid driver and vehicle
monitoring. The Prox-Booster tacho additionally sends the tacho-counter value, which relates to the travelled
distance of the vehicle.
The Booster allows an inserted Proximity or Smartcard driver ID card and embedded vehicle ID to be read from a
distance up to 10 meters (33 feet) in combination with NEDAP TRANSIT readers. This solution substantially
enhances the level of security when controlling activities of vehicles that are regularly used by different drivers.
Additionally a fully integrated vehicle and personnel access solution can be implemented.
For more details about the NEDAP TRANSIT reader refer to the TRANSIT installation guide.
The combined vehicle and driver ID is a unique NEDAP patented feature. Optionally the vehicle-ID can be
sacrificed if more information from the personal ID card is required.
The following personal ID card types are identified with the Boosters.
Prox-Booster (tacho)
NEDAP, EM and HID PROX
Smartcard-Booster
MIFARE (incl. DESFIRE EV1), HID iCLASS, ISO14443A, ISO15693 and Calypso.
Transition-Booster
all of the above
PROX-BOOSTER
:
CGDBOOSTER4 and 1444A-BOOSTER4
SMARTCARD-BOOSTER
:
CGDBOOSTER5 and 1444A-BOOSTER5
SMARTCARD-BOOSTER SB :
CGDBOOSTER7 and 1444A-BOOSTER7
TRANSITION-BOOSTER
:
CGDBOOSTER5 and 1444A-BOOSTER5
Compliance statement
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Déclaration conformité
Cet appareil se conferme aux normes RSS exemptés de license du Industry Canada.
L'opération est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interférence, et
(2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut cuaser une opération non pas voulu de cet
appareil.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
