17
Operation of product
Setup
Screw the SMA connector from the Antenna tightly on the Reader. Then connect the USB and/or the
Ethernet cable to connect it to your laptop or network. The last connector is the power cable, which
you use to switch the setup on or off.
Switching on/off
To switch the reader on, connect the supplied 12V power adapter, and plug it in. To switch the reader
off, disconnect the power adapter.
Use of antenna
The antenna can be connected with the SMA-connector to the reader. The antenna is designed so
that you can slide over one item at a time, or you can stack the items upon it.
TIP: Make sure that the tag of an item is in the Antenna Field when you want
to scan it.
It might happen that your item is bigger than the reader. In that case, if the reader doesn’t see the
book, try to move the large item through the antenna field, making sure that all the edges of the book
will be in the antenna field, until te reader recognizes the item.
