Nedap ISO-Booster, Manual

Page: 8 / 15

VP1006-200PM-00-OEM ISO Reader 4-2007/1.0 Page 4 of 9
LED indicators VP1006
push b utton
display
POWER Green on Power on
off No power
STATUS Blue
Slow blinking
Very fast blinking
Fast blinking
1 short flash
2 short flashes
3 short flashes
Operating ok
Service mode activ
Downloading or error during download
V-pack not coupled
Firmware present but not activ
No firmware present
Display on Address indicated No communication
off Communication status ok
V in Green on Power on
off No power
Orange Low power
Orange blinking Wrong power connection, in – out changed
Red Error
V out Green on Power on
off No power
Orange blinking Low power
Red blinking Error
LAST Green on V-pack is last one on the CAN-bus
off Status ok
Orange blinking CAN-bus error and last V-pack on CAN-bus
Red Not used
Red blinking Not used
+24V Green on 24V output switched on
off Output switched off
M1 .. M4 Green on Output on
off Output off
Red blinking Output error
I1 .. I4 Green on Input on
off Input off
TUNING /ID
Green on
Green blinking
Antenna ok
Antenna ok and tag identified
Red on
Antenna out of range
Red on
Antenna out of range
Red blinking
Antenna error / not connected