VP2001-200PM-00 Power supply
4-2007/0.1 Page 2 of 2
VP6001
V-sense antenna
General
The VP6001 is used as antenna in Velos system and connected to a V-pack with identification.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Connections
The VP6001 is connected to a V-pack by a coax cable, see manual of the concerning V-pack.
To open the VP6001 : remove screws at the side.
Adjustment
Tuning must be done by Lt with a plastic screw driver.
See manual of the connected V-pack for tuning instructions.
Lt
To antenna of V-pack
