ANPR ACCESS | INSTALLATION GUIDE
Configuration
20/36
Stop trigger:
Stop trigger event (either digital or ethernet).
System alarm:
System diagnostic alarm events as configured in system
diagnostics configuration.
The matrix contains the following icons (no icon is shown in case the event/action
pair is not possible):
Icon indicating that the corresponding action is assigned to the event.
Icon indicating that the action is disabled.
In order to enable, disable or configure an event action, it is sufficient to click the
icon as shown above. This will access the user to the Configuration page that
contains all action parameters and allows enabling/disabling the action itself.
The Configuration page allows setting each action parameters using configuration
TAGS i.e. strings starting with a % symbol. Click the context HELP buttons in each
web page to view the available TAGS. The ANPR translates these TAGS into their
corresponding value. Click on the Help button next to the configuration field to get
detailed information about the supported tags.
For example: Let's think of how to form the name of the file to which the image will
be saved. If the file name was set to %PLATE and the number plate is HG542ER then
the file name is HG542ER.JPG (if image is saved to JPG format).
%PLATE
HG542ER.jpg
When using TAGS not provided by the software, then they are not translated. For
example, the %TEST and %_ tags are not supported, so that:
%TEST%_%PLATE
TEST_HG542ER.jpg
