Installation and Configuration |
AEOS Blue and vehicle identification
EN
Manual version
3
31/48
5.
ANPR LUMO for TCP/IP
5.1
Configuring the ANPR LUMO reader for TCP/IP
When the ANPR LUMO reader is correctly mounted and connected (see the
ANPR LUMO Install
Guide
), the next step is to configure it to send the license plate number string to the AEOS blue
controller, via TCP messages.
To configure the ANPR LUMO reader, take the following steps:
Configure the ANPR LUMO reader
1.
Log in to the NEDAP ANPR LUMO software.
2.
Go to CONFIGURATION > ACTIONS > READ.
3.
Click ADD and select TCP.
Step
01
