11
Reader settings
Datamodel list allows you to select which data model is used in
the RFID tags of your library. Only one data model can be active
at any given time.
Use item id only can be used to tell LibAssist to track items by
their Item Id only and not care about the UID in the RFID tag.
Read multiple blocks tells LibAssist whether it should read
multiple blocks of data when reading RFID tags (checked) or one
block at a time (unchecked). Usually multiple blocks need to be
read, so it is faster to read them on a single pass, so it is
recommended to keep this option checked.
Security settings
Check EAS is used to control reading/writing the EAS flag when
searching and writing security settings for RFID tags. Note: EAS
FEATURE IS NOT CURRENTLY IN USE.
Check AFI is used to control reading/writing the AFI value when
searching and writing security settings for RFID tags.
AFI activated value is the value used in the RFID tags to indicate
that AFI is activated.
AFI deactivated value is the value used in the RFID tags to
indicate that AFI is deactivated.
AFI write errors is used to tell LibAssist how it should react to
errors encountered when writing AFI values to RFID tags. Default
is to beep twice and continue reading. The setting can be
changed so that LibAssist stops on errors and shows the Item ID
of the tag that caused the error.
