NED
UME-0027-03 XCM6040SAT2
17
3 Hardware
3.1 Camera Connection
Use the camera in the following way:
(1)
Camera Link cables must be used to connect the camera unit with the
frame grabber board.
Use two cables of the same length and the same manufacturer. Use
asymmetric Camera Link cables and connect the camera with the connector
labeled as
”Camera side”.
(2) Connect the camera with the designated power supply.
Use the designated power cable to connect the camera with the power
source for the camera. Insert the plug end of the cable into the camera. Attach
the opposite end (loose wires) to the power unit.
Other than the above, a personal computer, a frame grabber board, a
photographic lens, a lens mount, a light source and an encoder are necessary,
depending on the situation.
PC
Camera Link
Base Configuration
Frame Grabber
Board
Line Scan Camera
Camera Link Cable
(3M:14B26-SZLB-xxx-0LC)
Power Cable
Camera Power
Supply
DC +12V 15W
CL1
CL1
Figure 3-1-1 Connections between Camera and Frame Grabber Board and Power Supply
There are two connectors available for the Camera Link Base Configuration
board according to the manufacturer. Always check the frame grabber board
specifications before making connections.
