35
NED
XCM4040DLMT4
UME-0048-03
4.2.12 Initializing Pixel Correction Data
Deletes user arbitray pixel correction and resets to factory settings.
All of data of gain reset to factory settings except for the gain setting and offset
setting of the camera setting.
When the camera is shipped out, the data of factory black pixel correction and
factory white pixel correction is stored.It takes about 2 minutes to complete this
command task since the command is sent.
Note
：
While the command task is excuted, the camera does not respose for about
1 minute and 30 seconds. After that, OK comes back from the camera.
Do not turn off the power supply of the camera during this execution or
the camera may be damaged.
Format 1 CMD CR
CMD calibdef
<Example>
calibdef CR
>OK
>calibdef
4.2.13 Setting Pixel Correction
Sets pixel correction.
Format 3
CMD□VAL1□VAL2 CR
CMD
shc
VAL1
0,1,2,3,4,5
(0
：
Correction off
1
：
Factory black corfactory white correction
2
：
Factory black coruser arbitrary white correction
3
：
not used
4
：
User arbitrary black cor factory white correction
5
：
User arbitrary black cor user arbitrary white
correction)
VAL2
0 to 255 (Setting correction level :8bit)
<Example>
shc□1□200 CR (for Factory white correction, Correction level 200)
>OK
>shc 1,200
