![background image](http://html1.mh-extra.com/html/nectre-fireplaces/mega-le/mega-le_operating-instructions-manual_3822019003.webp)
The Nectre MEGA LE has two air controls for
controlling the fire.
1
Top Air Slide
, is a slide in (closed) and out (open)
manual operation by the user that allows air to enter
the firebox from above the door, where it is then
drawn down into the base of the fire. It also functions
as a air wash to keep the glass of the door clean. The
knob of the air slide is made from bakelite.
2
Bottom Air Slide
(Turbo Boost) is a manual slide
left (open) to right (closed) by the user that allows air
to enter directly into the base of the fire and is used
as a boost when either starting a fire or to excited
the fire to generate more heat output quickly. - NOTE
when operating the MEGA LE in the open position for
extended duration will reduce the efficiency. Should
always be closed when leaving the room.
3 The Nectre MEGA LE door handle is made from
mild steel and has a stay cool spring screwed on.
Warning: The handle may get hot if the appliance has
been operating at High Burn setting for an extended
period of time, in which case it is recommended using
a protective glove or equivalent to open the door.
2
1
2
3
4
5
3
1
4
5
Top air slide
Bottom air slide (Turbo Boost)
Stay cool spring handle
150mm diameter Flue
Cast iron door, ceramic glass
NOTE
Open the Top Air Slide before opening
the door to eliminate the chance of
back-draft and /or smoke entering
the room.
USING YOUR MEGA LE FOR THE FIRST TIME
For the first few time the appliance is lit it will give off some odorous fumes, which is a curring
of the paint as it heats. It is recommended that you do not touch the paint work while it is
curing, otherwise it can leave a permanent mark on the appliance.
Once the paint is cured the fumes will dissipate. It is suggested that you keep the room well
ventilated until these fumes have cleared.