10
© by NECTA VENDING SOLUTIONS SpA
0407 239 - 00
CONNECTING THE MACHINE TO THE
POWER SUPPLY
The machine is designed to operate under a single-phase
230 V~ voltage and is protected by T6.3 A fuses.
Before making the connection, ensure that the rating
corresponds to that of the power grid, and more specifi-
cally:
- the supply voltage rating must be within the range
recommended for the connection points;
- the main switch should be capable of withstanding the
peak load required, and at the same time ensure
proper omni polar disconnection from the power grid
with an opening gap of the contacts of at least 3 mm.
The switch, the power outlet and the plug must be
located in an easily accessible position.
The electrical safety of the machine is ensured only when
it is correctly earthed according to the safety standards in
force.
This fundamental safety requirement must be duly
verified, and if in doubt the system must be carefully
tested by qualified technicians.
The power supply cable is of the type with a fixed plug. Any
replacement of the power cable (see figure) should be
made by qualified and suitably trained personnel only
using cables type HO5 RN - F or HO5 V V-F or H07 RN-
F with a 3x1-1.5 mm
2
section.
CONTROLS AND INFORMATION
The user controls and information are located on the
outside of the sliding compartment (see Fig. 14).
The credit and all function messages are indicated on the
display.
Do not use adapters, multiple sockets and/or exten-
sions.
THE MANUFACTURER DECLINES ALL RESPONSI-
BILITY FOR ANY DAMAGE CAUSED BY NON-COM-
PLIANCE WITH THE ABOVE MENTIONED PRECAU-
TIONS.
The keypad contains a series of numbered keys. To select
a product, key in the number corresponding to the desired
product.
Key is used to cancel a selection already made.
Keys and are not available to the user; they are used
only for programming.
Fig. 14
1 - Lift cover
2 - Cable clamp
3 - Power supply cable
Fig. 1
1 - Door opening grip
2 - Advertising spaces
3 - Prearrangement for bill accepter
4 - Prearrangement for key type payment systems
5 - Display
6 - Coin slot/return.
7 - Selection keypad
8 - Lock
9 - Direct selection buttons
10 - Coin return flap
11 - Product flap
12 - Removable ventilation grille
13 - Glass front
Summary of Contents for Snakky
