Necta Colibri, Instructions For Installation, Use And Maintenance Manual, Page: 10 / 48

6
© by NECTA VENDING SOLUTIONS SpA 03-2003 217 00
LOADING SUGAR AND
INSTANT PRODUCTS
The covers can be opened only with the door open.
After lifting their cover, fill the single containers with the
appropriate products, taking care not to compress them to
prevent packing. Make sure the products do not contain
any clots.
When handling the sugar/stirrer dispenser shelf, en-
sure that the key (see Fig. 8) is completely rotated
clockwise to prevent the lock bolt from interfering with
the stirrer stacker.
LOADING STIRRERS
Remove the cover and the stirrer weight (see Fig. 8), then
insert the stirrers to be loaded.
Remove the paper strip, ensuring that the stirrers are all
placed horizontally.
Replace the stirrer weight and the cover.
The stirrers must be burr free and not curved.
LOADING CUPS
To load the cups do as follows:
- open the door and remove the cover from the cup
dispenser;
- slightly lift the cup dispenser and tilt it (see Fig. 2);
- do not rotate the columns during the loading opera-
tions;
- load the columns with cups, without exceeding the
dispenser height;
- re-engage the cup dispenser and replace the cover;
- close the machine and make a test selection.
Fig. 2
1 - Spacer washer
2 - Knurled nut
3 - Cup shift arm
4 - Cup container
LOADING COFFEE
The cover can be opened only with the door open.
Lift the cover and fill the hopper with coffee, ensuring that
the shutter is fully open (see Fig. 3).
Fig. 3
1 - Coffee hopper shutter
2 - Coffee hopper
3 - Milk container
4 - Chocolate container
5 - Powder chute
6 - Powder feeder