Necta Brio 250, Installation, Use And Maintenance Manual

Page: 7 / 44

3
© by NECTA VENDING SOLUTIONS SpA 0301 162-00
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installa-
tion. It must be installed in a dry room where the tempera-
ture is between 2° C and 32° C, and not where water jets
are used for cleaning (e.g. in large kitchens, etc.).
The machine should be placed close to a wall, so that the
back panel is at a minimum distance of 4 cm from it and
correct ventilation may be ensured.
The machine must never be covered with cloth or the like.
The machine should be positioned with a maximum incli-
nation of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included.
Important notice!!
Access to the machine interior for maintenance and/or
repairs is via the back panel.
Therefore, provisions should be made for the machine to
be rotated, thus allowing removal of the back panel.
Positioning the machine on a cabinet
The machine can be installed on a table or on any other
suitable stand (recommended height is 820 mm).
If possible, it is advisable to use the special cabinet, which
can house the liquid waste tray, the water supply kit, the
payment system and, in the case of very hard water, the
softener unit.
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of
the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such system has sole responsibility for any
damage to the machine or to things and persons caused
by faulty installation
.
The integrity of the vending machine and its conform-
ity with the rules and regulations in force for its
relevant systems must be checked by qualified per-
sonnel at least once a year.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Height 750 mm
Width 540 mm
Depth 550 mm
Height of cabinet 820 mm
Weight 55 Kg
Power supply voltage 120 V
~
Power supply frequency 60 Hz
Installed power 1.400 W
CUP DISPENSER
Suitable for cups with a rim diameter of 73-74 mm. with a
capacity of approximately 250 cups.
COIN MECHANISM
The machine is supplied with provisions for the installation
of payment systems with MDB protocol.
Fig. 2