14
Bringing up the bobbin thread
Hold the upper thread with your left hand.
Turn the handwheel towards you (counter-
clockwise) to lower the needle down below
the needle plate then raise it to bring the
bobbin thread up.
Gently pull on the upper thread to bring the
bobbin thread up through the needle plate
hole. The bobbin thread will come up in a
loop.
Pull both threads to the back under the
presser foot.
Note
Your machine is threaded and ready for
sewing, follow the instructions on "Starting
to sew" (Page 23) chapter to start sewing.
Summary of Contents for K121A
