May 2001
System Hardware Manual
4 - 67
A6-32
400
0-6
42-0
1
–
R
e
le
as
e 4
.0
Ma
y 2
001
3.6
Wall Mounting the Expansion KSU
1.
Position the bottom of the Expansion Wall Mount Bracket on to
the top of the Basic Wall Mount Bracket and fasten with four
(locally provided) screws. Refer to Figure 4-13 Attaching the
Wall Mount Bracket and Figure 4-16 Attaching the Expansion
Wall Mount Bracket to the Basic Wall Mount Bracket.
2.
Hang the KSU on the two hooks protruding from the expansion
wall mount bracket as shown in Figure 4-14 Hanging the Basic
KSU on the Bracket.
3.
Secure the KSU to the wall by placing a screw (locally
provided) into the hole in the centre of the wall mount bracket
as shown in Figure 4-15 Securing the Basic KSU to the Wall.
Figure 4-16 Attaching the Expansion Wall Mount Bracket to the Basic Wall Mount
Bracket
