May 2001
System Hardware Manual
7 - 237
A6-32
400
0-6
42-0
1
–
R
e
le
as
e 4
.0
Ma
y 2
001
4.
Bundle the cord from the modular jack leaving about
eight inches. Use a tie wrap to secure the
bundled cord.
5.
Place the bundled line cord in the space between the
WMU-UA Unit and the wall. Lead the line cord out
through the slits as shown in Figure 7-71 Leading the
Line Cord out of the WMU-UA Unit.
6.
Attach the WMU-UA Unit to the posts on the wall
plate (locally provided). Place locally provided screws
in the nodes on the WMU-UA Unit and secure the
WMU-UA Unit to the wall.
7.
Connect the line cord to the Multiline Terminal.
Figure 7-71 Leading the Line Cord out of the WMU-UA Unit
Figure 7-72 Attaching the Wall Mount Unit to the Wall
Posts
Nodes
Nodes