NEC Australia Pty Ltd
Xen Master & Xen Axis
5 - 140
Installing Electronic Telephone Units
A6-3
240
00-6
42-
01 –
R
e
leas
e 4
.0
M
a
y
20
01
4.10
SLI(8)-U13 ETU
4.10.1
Description
The SLI(8)-U13 ETU provides an interface for Single Line
Telephones and for analogue voice mail units. It has a
built-in ringing generator (RSG) and supports a maximum
of eight Single Line Telephones or analogue Voice Mail
ports. Refer to Figure 5-24 SLI(8)-U13 ETU.
This ETU also provides circuitry for loop status detection,
talk battery, sending ringing signals, message waiting, and
loop disconnect for dial pulse signal detection.
Note: The PBR circuit in the CPUB( )-U13 ETU or the PBR (
0
)-
U13 ETU is required with Voice Mail or DTMF Single Line
Telephones.
4.10.2
Installation
A maximum of 14 SLI(8)-U13 ETUs can be installed in the
Xen Master system (maximum of 112 ports) in slots S1~S8
in the first, second or third KSU.
A maximum of 3 SLI(8)-U13 ETUs can be installed in the
Xen Axis system (maximum of 24 ports) in slots S3~S7.
Figure 5-24 SLI(8)-U13 ETU
