856-180423-001-00
- 25 -
3.
OS Install
VMware ESXi installation to this system is done by the install media (NEC Custom Image).
Notes
・
This product does not include ESXi license. Please prepare the licenses(required quantity) for
installed ESXi edition.
・
Do not mix the HDD that can boot other OS.
・
Please set the “Boot Mode” and “X2APIC” by BIOS setup menu before OS installation
Item
Default
To be changed
[Boot] – [Boot Mode]
UEFI
Legacy
[Advanced] – [Processor Configuration] – [X2APIC] Enabled
Disabled
・
Please set the “HDD Priorities - Boot Option #1” to “SwissbitUSB Flash Module2000” (USB-DOM)
by BIOS setup menu after OS installation.
Item
To be changed
[Boot] - [HDD Priorities] - [Boot Option #1]
SwissbitUSB Flash Module2000
(This device is the USB-DOM)
Set the install media to ODD, then DC ON.
After auto-boot the installer, Storage Device select menu will appear.
Select the USB device that is about 3.74GB in local, then start Install.
The scratch partition setting by manual is needed, when ESXi is installed to this USB device.
Refer the appendix procedure that is attached to ESXi license, please set the proper setting.