background image

4

  

NEC VersaBay IV Drive

Further Information

See the printed NEC Versa user’s guide for further information about:

!

 

NEC VersaBay IV capabilities.

!

 

The Phoenix BaySwap utility.

!

 

Specifications for your drive.

Some drives come with one or more software CDs. The software may provide additional
functionality for your drive. Not all CDs require printed instructions; however, if NEC
Computers has provided printed instructions for installing, configuring, or launching the
software, those instructions are published in a separate document.

Information in this publication is subject to change without notice. NEC is a registered trademark and Versa is a U.S.
registered trademark of NEC Corporation and/or one or more of its subsidiaries. Both are used under license. Microsoft
and Windows are registered trademarks of Microsoft Corporation. All other trademarks and registered trademarks are the
property of their respective owners.  Printed in the U.S.A. 04/2001.

©2001 NEC Computers Inc.

819-200744-000

04/2001

*819-200744-000*

Summary of Contents for VERSABAY IV DRIVE

Page 1: ... NEC VersaBay IV drive Note For details on installing any software that ships on CD with your drive see the sheet s packaged with the CD NEC VersaBay IV Drive Features See the following figures for feature locations on NEC VersaBay IV drives Features are described after the figures Note your drive may look slightly different or have slightly different features Typical CD ROM drive features A Versa...

Page 2: ... slot as follows 1 If a VersaBay IV device is in the slot use the Phoenix BaySwap utility or power off the system See your printed user s guide for information about the Phoenix BaySwap utility If a VersaBay IV weight saving module is in the VersaBay IV slot skip to step 2 If you plan to hot swap a VersaBay IV battery and the system is not connected to an AC power source verify that the primary ba...

Page 3: ... For information on hot swapping or warm swapping devices see the information about the Phoenix BaySwap utility in your printed user s guide 2 Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot 3 Flip the latch to the open position 4 Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay Inserting an NEC VersaBay IV drive 5 Press t...

Page 4: ... instructions for installing configuring or launching the software those instructions are published in a separate document Information in this publication is subject to change without notice NEC is a registered trademark and Versa is a U S registered trademark of NEC Corporation and or one or more of its subsidiaries Both are used under license Microsoft and Windows are registered trademarks of Mi...

Reviews: