NEC VersaBay IV Drive 3
Installing the Drive in the NEC VersaBay IV Slot
Use the following steps to install your new VersaBay IV device in the VersaBay IV slot.
1.
If you need to remove a device from the VersaBay IV slot, see “Removing a Device from
the VersaBay IV Slot,” earlier in this document.
For information on hot swapping or warm swapping devices, see the information about the
Phoenix BaySwap utility in your printed user’s guide.
2.
Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot.
3.
Flip the latch to the open position.
4.
Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay.
Inserting an NEC VersaBay IV drive
5.
Press the latch back to the locked position.
6.
Press the Power button to power on or resume operation.
