NEC VERSA VXI Series, Service And Reference Manual

Page: 37 / 106

System Configuration and Setup 2-17
Peripheral Setup
The Peripheral Setup menu displays the connection locations between the system and the
Input/Output (I/O) ports and lets you specify different port assignments as needed.
Peripheral Setup
Parameter Default Setting Alternate Setting(s)
USB Controller Disabled Enabled
Internal Hard Drive Enabled Disabled
Serial Port Auto Disabled/(PnP OS Setup
1
)
COM1,IRQ4/COM2,IRQ3
COM3,IRQ4/COM4,IRQ3
Parallel Port Auto Disabled/LPT1/LPT2
(PnP OS Setup
1
)
Parallel Mode Bi-Dir Uni-Dir/ECP/EPP
IR Serial Port Disabled Auto/(PnP OS Setup
1
)
COM2,IRQ3/COM3,IRQ4/
COM4,IRQ3
1
Appears only when configured by the Windows 98 device manager.
Peripheral Setup allows you to define the following functions.
!
USB Controller — Enables or disables the USB controller.
! Internal Hard Drive — Enables or disables the internal hard drive.
!
Serial Port — Disables the port or changes its address assignment.
! Parallel Port/Parallel Mode — Disables or reassigns the parallel port and selects a parallel
port mode.
! IR Serial Port — Enables, disables, or reassigns the IR serial port.
Other BIOS Setup Options
BIOS Setup offers other options, including the following:
! Change Language Setting — Controls the BIOS setup language display. English, Japanese,
and French are the available options.
!
Refresh Battery — Launches the Refresh Battery utility. Once launched, the utility fully
discharges your battery to eliminate any residual memory effect. Once refreshed, your
battery is conditioned to recharge to its full capacity. To recharge the battery, connect your
NEC Versa to AC power. This process may take up to four hours to complete.
! Auto Configuration with Defaults — Loads default settings.
!
Save Settings and Exit — Accepts changes made to current settings, saves to CMOS, and
exits BIOS Setup.
!
Exit Without Saving — Reverts to previously selected settings and exits Setup.