Disassembly and Reassembly 3-3
n
Do not disassemble the system into parts that are smaller than those specified in the
procedure.
n
Several different type of screws are used to fasten various parts in the system. As you
disassemble the system, note the screw type, length, and position. Use care to ensure that all
screws are returned to their original positions.
n
Label all removed connectors. Note where the connector goes and in what position it was
installed.
Primary Battery
Remove the primary battery as follows.
Note
Only use batteries that were specifically designed for use in the Versa TXi notebook.
Installing another manufacturer’s battery, or using a combination of very old and new batteries
can deteriorate battery and equipment performance.
1.
Turn off system power.
2.
Close the LCD panel and turn the system over.
3.
Slide the battery release latch toward the side of the system and hold firmly.
Locating the battery release latch
A
– Primary Battery
B
– Battery Release Latch
4.
Continue to hold the battery release latch as you pull the battery out of the system.
Summary of Contents for Versa TXi Series
Page 1: ...NEC Versa TXi Series Notebook Computers VERSA TXi S E R V I C E M A N U A L ...
Page 42: ...3 Disassembly and Reassembly n Required Tools and Equipment n Disassembly n Reassembly ...
Page 72: ...6 Troubleshooting n Problem Checklist n Startup Problems n Diagnostics ...
Page 81: ...7 Specifications n System Components n Memory Map n Interrupt Controllers ...