manualshive.com logo in svg

NEC VERSA SX HARD DISK DRIVE, User Manual, Page: 91 / 196

Share
Download
NEC VERSA SX HARD DISK DRIVE User Manual Download Page 91

4-16   Using the Hardware

Inserting a card

A – Ejection Buttons

3. 

Use the software preinstalled on your system to check PC card slot
availability. In Windows 95, look for the PC Card icon in the control
panel or on the right side of the taskbar. It shows which slot contains
a PC card (PCMCIA) and which is empty. In Windows NT, look for
the CardWizard™ SystemSoft icon on the desktop.

Removing a Card

Follow these steps to remove a PC card in Windows 95 and Windows
NT.

1. 

From the screen, select My Computer and Control Panel. (Or, you
can also select the Taskbar PC card icon.)

2. 

Select the PC card icon.

3. 

Select the PC card to remove, and select Stop.

Windows 95 alerts you if any applications are still using the card. If
all applications using the card are closed, services for that card are
shut down. You receive a message saying that it is safe to remove the
card.

Summary of Contents for VERSA SX HARD DISK DRIVE





































































































































































































Reviews:

No comments