Removing the Battery
Perform the following steps to remove the battery:
1. Make sure to power off the Versa M320.
2. Turn the unit upside down.
3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1
Fig. 1 Removing the battery
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
Removing the Battery
), then
perform the following steps:
4. Remove the screws as shown in Fig. 2
Fig. 2 Removing the Hard disk drive cover screws
5. Lift up the hard disk drive and disconnect it as shown in Fig. 3
M2x3 Silver
NEC Versa M320 Disassembly Manual
Page 5
