NEC Versa LXi, Service And Reference Manual, Page: 67 / 122

Disassembly and Reassembly 3-17
Switch Settings
A six-position dip switch is located underneath the keyboard. The following list identifies each
switch setting and its function.
!
Switch 1, Password Override Switch — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to “ON”
and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
!
Switch 3 — Reserved for factory use; Default is “ON.”
!
Switch 4 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
!
Switch 5 — BIOS flash enable; Default is “OFF” (disable). Before updating your BIOS,
change the setting to “ON.”
!
Switch 6 — Logo select; Default is “OFF” for U.S.
Default switch settings
Dip switches 2, 3, and 4 set to “On.”
Front Cover
Use the following procedure to remove the front cover from the system.
Before handling any internal components, discharge static electricity
from yourself and your clothing by touching a nearby metal surface.
1. Remove the keyboard and VersaBay III device.
2.
Close the LCD panel and turn the system over.