background image

11-4   Getting Service and Support

Direct assistance is available 24 hours a day, 7 days a week. Call the NECC Support
Services, toll free, at 

1-800-632-4525

 (U.S. and Canada only) for the following support.

!

 

System hardware — toll-free phone support is limited to the length of the standard
warranty.

!

 

Preinstalled software — toll-free phone support for 90 days from the time of your
first call to the NECC Support Services.

Please have available your system's name, model number, serial number, and as much
information as possible about your system's problem before calling.

For outside the U.S. or Canada, please contact your local NEC office or dealer for the
support and service available in your country.

Email/Fax to Support Services

The NECC Support Services offers technical support by email over the Internet
network if you have a modem. The Internet address is:

[email protected]

You can also fax technical questions to the NECC Support Services if you have access
to a fax machine or fax/modem. The fax number is:

801-578-5101

When using the email or fax support service, you should include the following words in
the subject field for prompt response from the appropriate technical person:

!

 

Desktop

!

 

Monitor

!

 

Notebook.

You should provide as much specific information about your questions as possible.
Also, if you are sending a fax, please include your voice telephone number, fax
number, model number and system serial number with the question. You will receive a
response to your questions within one business day.

Summary of Contents for Versa LXi



















































































































































































































Reviews: