3-6 About the Software
PHDisk
This utility creates a file on the hard disk that is large
enough to contain all the software in memory. Its default
size is approximately 16-MB. You will need to update this
utility only if you upgrade the amount of memory to more
than 16-MB in your NEC Versa 2200. This utility must be
run in DOS. (It will not run on a compressed drive.)
Auto Setup Utility
Auto Setup automatically configures your NEC Versa
2205C each time you start it up. This utility also lets you
change your system start-up settings.
Using Auto Setup
Use Auto Setup as follows:
1.
Reboot your system. When the screen displays the large
blinking block at boot-up, press
F1
.
2.
When the Auto Setup Summary screen is displayed, en-
ter the highlighted letter in the menu bar to that repre-
sents the category you want.
For example, type
D
to open the Disk Drive Settings
window.
3.
Use the up and down arrows to move between selections
displayed on the screen. Press
Alt
+ the arrow keys to
display setting options.
4.
Follow the instructions at the bottom of the screen to
make selections, change values, and exit.
