Learning to Use the Hardware 2-9
2.
Open the right-rear cover of the system.
3.
Attach the 15-pin cable connector to the video port on the system. (The
video port is the second from the right.) Secure the cable connection with
the screws provided.
Connecting a monitor
4.
Connect the monitor power cable and plug it into a properly grounded
wall outlet.
5.
Follow any setup instructions in the monitor manual.
6.
Turn on power to the monitor.
7.
Press the Suspend button to resume Active mode or power on the NEC
Versa 2000.
Toggle the
Fn + F3
function key combination to select both the LCD and
CRT monitor.
Printer
You can attach a printer with either a parallel or a serial connector. A paral-
lel printer connector has 25 pins; a serial connector has 9 pins. Chances are
your printer came with both types of connectors.
Video Port
Monitor Cable
Summary of Contents for VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION
Page 41: ...About the Software 3 7...
