NEC USB PortBar with the Driver Installation Diskette 5
Disconnecting the USB PortBar
Disconnect the USB PortBar from your NEC Versa as follows.
Note
Disconnect and connect the USB PortBar with the NEC Versa system powered on or in
Standby mode.
Do
not
unplug any peripheral devices connected to the USB PortBar with the NEC Versa system
powered on or in Standby mode.
1.
Remove the small connector end of the USB cable from the back side of the USB PortBar.
Remove the larger connector end of the USB cable from the USB port on the NEC Versa.
Disconnecting the USB PortBar from your NEC Versa
2.
Place the USB cable back into its holder on the USB PortBar. Note that the smaller and
larger connector fit into slots based on the size of the end of the cable.
Replacing the USB PortBar cable
3.
Push down on the cable between the teeth marks to ensure a proper fit for storing.
