NEC Univerge SV9100, System Hardware Manual

Page: 511 / 556

Issue 2.0
SV9100 System Hardware Manual 7-35
2. Using the mini-plug connection cord, connect the ADA-L
Unit IN jack to the cassette recorder EAR PHONE jack
(Refer to Figure 7-28 ADA-L IN Jack Connection ).
11.3.3.3 Send a Startup (REMOTE) Signal to the Recorder
1. Using a Phillips screwdriver, remove the screw from the
ADA-L UNIT. Solder the cable to the T1 and T2 contacts on
the internal board (refer to Figure 7-29 ADA-L Solder
Points ).
2. Run the cable out of the opening of the ADA-L UNIT (refer to
Figure 7-30 ADA-L Cable Opening ).
Figure 7-28 ADA-L IN Jack Connection
IMPORTANT
❍ Ensure solder does not adhere to
surrounding parts.
❍
Remove any solder waste from the board.
Figure 7-29 ADA-L Solder Points
IMPORTANT
❍ DSW 4 must be set to ON.
❍ This function is not supported on some
recorders.