NEC Univerge SV9100, System Hardware Manual

Page: 466 / 556

Issue 2.0
6-16 Installing SV9100 Cordless Telephones
S
ECTION
3 B
LUETOOTH
H
UB
A
DAPTER
3.1 Bluetooth Hub Adapter (BHA) Features
The BHA-L UNIT adapter connects a Bluetooth device to a multiline terminal. The
BHA-L UNIT cannot be connected to the DTL-2E-1, DTL-6DE-1 or DTL-12E-1
telephone.
3.1.1 Installing the BHA-L UNIT
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
 Only one BHA-L UNIT can be attached to the DTL multiline
terminal.
3. Lower the tilt leg to the first position (refer to Figure 6-20 Separate Tilt
Leg from Leg Support ).
4. Remove the connector cover (rubber) from the bottom of the multiline
terminal (see
Figure 6-21 Removing the Connector Cover on page
6-17 ).
IMPORTANT
Before installing or removing the BHA-L UNIT, remove the
line cord and the AC adapter from the outlet.
Figure 6-20 Separate Tilt Leg from Leg Support
Stoppers
Tilt Leg