![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_configuration-note_3948612020.webp)
AudioCodes Mediant E-SBC
20
Document #: LTRT-12490
SV9100 IP-PBX & BroadCloud SIP Trunk
To route incoming calls via the DDI Translation tables configure the SIP trunks as DID types in
Programming command
Easy Edit> Advanced Items> VoIP> Networking> SIP Networking>
Profile 1> SIP Profile 1 – Trunk General Settings> SIP Profile 1 – Trunk Incoming Type
:
Figure
3-10: Easy Edit> Advanced Items> VoIP> Networking> SIP Networking> Profile 1> SIP
Profile 1 – Trunk General Settings> SIP Profile 1 – Trunk Incoming Type
10.
Configure the number of received DID/DDI digits from the SIP carrier. In most cases
this can be configured as 6 digits, if more than 6 digits are received from the carrier,
the last 6 digits will be used for call routing:
Figure
3-11: Easy Edit> DDI> DDI Basic Data Setup
Summary of Contents for Univerge SV9100
Page 2: ......