NEC Univerge SV9100, User Reference Manual

Page: 4 / 6

©
SoundTel, Inc.
4
To use DND :
1. Press Prog
2. Press DND
3. Press Set
4. Select ALL
To Cancel: Prog, DND, Cncl .
To store speed-dialing numbers on your personal station directory :
1. You must have an available bin number location (0-9). Each
number stored in your station directory has an assigned bin
number.
2. Press Prog .
3. Choose STA for station
4. At the SPD Program screen enter Bin location number (exp. 0-9)
5. Enter 9 + phone number using keypad, press HOLD, enter name
using keypad.
6. Hold, Speaker
Go to DIR softkey, press STA to locate and dial numbers.
Note: To delete press Prog, STA, Bin number to delete, then exit.
System speed dials: Are set like station speed dials. With system speed
dials all phone numbers and contacts are accessible to everyone on the
phone system.
Ext. Speed dials. Shows all extensions numbers and numbers that are
on the phone system.
One Touch Keys
To Program a DSS One-Touch Key:
(For storing an extension number, phone number, or other
one-touch function under a blank key)
1. Press Speaker
2. Press 751
3. Press line key to be programmed
4. Press 01 and DSS / ONE TOUCH will display
5. Enter extension number OR 9 + destination phone number
6. Press Hold to save, you should hear a confirmation beep
7. Press Speaker to exit
Note: Service code
00 will erase function- To erase press
Speaker , dial 751 , press line key, dial 00 .
To set Call Forward:
(Forward all calls. Most common)
1. Press Speaker
2. Dial 741
3. Press number 1
4. Dial destination number or extension where calls are to be
forwarded
5. Press Speaker.
To Cancel: Press Speaker , dial 741, 0, Speaker.
Another common Call Forward feature code is:
744 = call fwd. busy & no answer: Calls forward when both busy
and/or unanswered.