manualshive.com logo in svg

NEC Univerge SV9100, Programming Manual

Share
Download
NEC Univerge SV9100 Programming Manual Download Page 654

Issue 4.0

2-614

Program 47 : InMail

Dial Action Table Actions

TRF Action - Screened Transfer (1)   (TRF)

Use this action to allow an Automated Attendant caller to place a Screened Transfer to an 
extension. After an Automated Attendant caller dials an extension, VM8000 InMail calls (screens) 
the destination to see if the transfer can go through.

If the destination is available, the Automated Attendant rings it. If the destination answers, the call 
goes through.

If the destination does not answer during a preset interval, is busy, or is in Do Not Disturb, the 
Automated Attendant does not extend the call. It then provides the caller with additional options.

Number Option

Normally, the corresponding Number option should be XXX. Note that the key you choose for this 
action is the first digit of the called extension number.

For example, to allow callers to place Screened Transfers to extensions 301~399, for key 3 
enter TRF for the 

Action

 and XXX for the corresponding 

Number

.

To have Screened Transfer call a specific extension, the corresponding Number option should be 
that extension number. The caller then dials that single digit to reach the extension.

For example, to have callers dial 8 to reach extension 303, for key 8 enter TRF for the 

Action

 

and 303 for the corresponding 

Number

.

UTRF Action – Unscreened Transfer (2)   (UTRF)

Use this action to allow an Automated Attendant caller to place an Unscreened Transfer to an 
extension. This is similar to telephone system unscreened transfers in which the transferring party 
immediately extends the call. After an Automated Attendant caller dials an extension, VM8000 
InMail transfers the call to the destination and hangs up. Any recalls or additional routing are 
handled by the telephone system – just as with any other unscreened transfer.

Number Option

Normally, the corresponding Number option should be XXX. Note that the key you choose for this 
action is the first digit of the called extension number.

For example, to allow callers to place Unscreened Transfers to extensions 301~399, for key 3 
enter UTRF for the 

Action

 and XXX for the corresponding 

Number

.

Summary of Contents for Univerge SV9100



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands