NEC UNIVERGE SV9100 DT750, User Manual

Page: 56 / 122

48
When changing the file name, refer to Step 20. on
page 46 .
When not changing the file name, refer to Step 21.
on page 47 .
22. Press BK softkey once to delete the default file
name and then enter a new file name by using
the digit keys.
23. Press or Exec softkey to start the
downloading process. While downloading a file,
the LCD displays “Downloading...” first and then
“Saving...”.
24. After the downloading process is complete, the
display changes as follows:
25. Reset the DT750 by pressing Exit softkey.
FILE NAME Directory.csv (Fixed)
CODE Unicode (UTF-8)
For details on character entry method, see How to Input
Characters on page 68 .
A maximum of 20 characters ("0-9", "A-Z", "a-z", "*",
"#", ".", "-" or "_") can be entered as a file name.
To delete an entered character, press BK softkey.
Be sure not to turn OFF the DT750 while "Saving..." is
displayed on the LCD.
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD. Check
to see the following and then make a retry.
CHECK POINTS ACTIONS
Download file is not placed
in the specified directory. Place the download file in
the specified directory.
A different file name is
specified between DT750
and FTP/TFTP server. Set the same file name from
both DT750 and FTP/TFTP
server.
Incorrect IP address of FTP/
TFTP server has been
entered from the telephone.
Set the proper IP address of
FTP/TFTP server.
The power to FTP/TFTP
server or network equipment
is OFF.
Turn on the power.
LAN cable is disconnected.
Reconnect the cable
securely.
Exit
Download Complete!
Press Exit to Reset.