Document No. SIB 244
Page
29
of
52
1
st
July 2008
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
Building
the
configuration
file:
•
Launch
the
IP
phone
manager
software
Once
the
software
is
launched
click
on
the
“Auto
Config”
tab.
Click
on
Terminal
The
basic
settings
needed
to
get
the
phone
working
out
of
the
box
are:
1
st
server
address
1
st
server
port
Assign
the
IP
address
programmed
in
PRG
10
‐
12
‐
09
to
1
st
server
address.
Assign
port
5080
to
first
server
port.
